威海休闲-威海休闲

楚雄州附近有没有服务

Current position: Honglin machinery > News Center > Conveyor article >
Conveyor article

Every effort should be made to reduce downtime during scraper conveyor operation

Number of visits: Release date: 2020-05-22 16:28 source: admin

Scraper conveyor is a kind of continuous transportation equipment. The main working objects are dust, small particles and small pieces. Although the operation method is not complicated, the scraper conveyor should be properly debugged before use. In order to make all aspects of the machine in a better state.

Before debugging the scraper conveyor, the connecting bolts on the scraper conveyor should be tightened first; secondly, it should be cleaned Scraper conveyor Again, add lubricating oil to each moving part. After the preparatory work is completed, the commissioning is carried out.

When commissioning the scraper conveyor, it is necessary to carry out no-load commissioning after checking all aspects of the conveyor and confirming. After completion, there are no-load running test and load test of the machine. In addition, the tension of each sprocket wheel should be able to balance under the initial working conditions of the chain wheel and the tension of the two tension wheels in the initial working condition.

 Scraper conveyor

Since the trial operation of the scraper conveyor has passed the test, as long as the relevant requirements are strictly followed, there is basically no problem with the scraper conveyor in the formal conveying operation, and the materials can be effectively transported to the designated position.

The scraper conveyor should be operated as evenly as possible, and it is not allowed to stop and start at full load. At the same time, it is necessary to regularly check the bolt connection between the tank bottom plate and chain plate, as well as the fastening degree of the traction chain. Even after adjustment and processing, it can ensure the smooth delivery of materials.

Every effort should be made to reduce downtime during scraper conveyor operation. Scraper conveyor is usually not allowed to run under no-load, because no-load not only shortens the effective operation time, but also leads to waste of power and invalid wear of parts. If the scraper conveyor fails during operation, temporary maintenance measures should be taken as far as possible to keep the equipment running as long as the fault scope is no longer extended, and the accident handling shall be delayed to the spare time of maintenance or shift change to avoid shutdown. Extend its effective running time.



Henan high tech Development Zone

Tel: 0371-56783311 online QQ: 1105086557 email: [email protected] Website map

Copyright No. 13022-2009 Engine technology network