常州大学城兼职mm-常州大学城兼职mm

楚雄州附近有没有服务

Current position: Honglin machinery > Product Center > Bucket elevator series >

Belt bucket elevator

Product introduction

Bucket elevator Selected models
     As a common lifting equipment, the selection of bucket elevator is restricted by many factors, and choosing the wrong model will bring endless trouble to users. Generally, the selection of bucket elevator depends on the following factors:
   
one Shape of material State: the material is powdery or granular or small.
   
two Physical properties of the material: whether the material has adsorption or viscosity, whether it contains water.
   
three Specific gravity of materials: General bucket elevator parameters are for bulk specific gravity stay one point six Calculate the specific gravity of the material and the tensile strength required to design the material.
    four The conveying volume per unit time.
           Generally speaking, the shape of the material directly determines the unloading mode of the material. The common law is that the powder material is discharged by centrifugal casting, and the block material is discharged by gravity. The different discharging methods determine the hopper form of the bucket elevator Different from deep discharge bucket, centrifugal bucket and shallow bucket are used. If the type of hopper used by bucket elevator is different, the material conveying capacity per unit time is different. Bucket elevator final Conveying capacity is a comprehensive parameter which depends on hopper form, hopper speed, material specific gravity, material property and hopper quantity. The process of material selection is as follows Transmission mode (bucket elevator model) Material properties Unloading mode Hopper form The lifting capacity of this series of bucket elevator Determine the model.

 

TD Type bucket elevator TH Comparison of the features of the elevator and the bucket surface

 

type

TD Type bucket elevator

TH Type bucket elevator

structure characteristics

Rubber belt is used as traction component

The forged ring chain is used as the traction component

Unloading features

Discharge materials by centrifugal or mixed mode

Mixed or gravity unloading is adopted

Suitable for conveying materials

Loose density ρ one 5t/m3 Powder, granular, small pieces of non grinding, semi grinding materials

Loose density p one 5t m’ Powder and granular . Small pieces of non grinding and semi grinding materials

Applicable temperature

The temperature of the material to be transported shall not exceed sixty When the rubber is not heat-resistant two hundred

The temperature of the material to be transported shall not exceed two hundred and fifty

Main models

TDl00 TD160 TD250 TD315 TD400 TD500 TD630

TH315 TH400 TH500 TH630(TH800)(TH1000)

Lifting height

About 4—40mm Within the scope

About four 5—40mm Within the scope

Conveying capacity

4—238m3/h

35—185m3/h



Henan high tech Development Zone

Tel: 0371-56783311 online QQ: 1105086557 email: [email protected] Website map

Copyright No. 13022-2009 Engine technology network