广东大学城附近相约-广东大学城附近相约

楚雄州附近有没有服务

Current position: Honglin machinery > Product Center > Scraper conveyor >

Chain scraper conveyor

Product introduction

 
      

working principle

FU Type chain conveyor It is a continuous conveying equipment for conveying dust, small particles and small pieces of materials, which can be tilted horizontally( fifteen Degree). When conveying, the chain is all buried in the material, so it is called FU Type a chain conveyor.  

The bulk material has the characteristics of friction and side pressure. It is pulled by the conveyor chain in the direction of its movement in the groove, which increases the internal pressure and friction between particles, thus ensuring the stable state between the material layers. At the same time, it can increase the friction between particles in the groove.  

In horizontal transportation, the internal friction ensures the stable state between the material layers and forms a continuous whole flow. When the internal friction between the material layers is greater than the external friction force between the material trough and the groove wall, the material will move forward with the conveyor chain. When the ratio of the height of the material layer to the width of the machine slot meets certain conditions, the material is stable.  

 

main features  

1、 The conveying capacity is large, and the high-efficiency conveyor can transport a large amount of materials in a small capacity space, and the conveying capacity can reach 6m3/h~15m3/h. 

2、 With the help of the internal friction force of materials, the pushing materials become pulling materials and the conveying energy consumption is low    The maximum work done by moving parts becomes effective work, which saves electricity compared with screw conveyor 40% ~60%  

3、 It is safe to seal. The whole machine shell is sealed so that there is no seam drill in the dust. The operation is convenient, safe and reliable. The equipment will not endanger people and prevent accidents.   When conveying flying, toxic, high temperature, flammable and explosive materials, the working conditions can be improved and the environmental pollution can be reduced.  

4、 The service life of the conveyor chain is long, and the normal service life of the conveyor chain processed with alloy steel material by advanced heat treatment means is more than five The roller life on the chain (according to different materials) is 2~3 Year.  

5、 7. Flexible process layout. It is allowed to select various types of material inlet and outlet at any position of the casing, which can be arranged on the elevated, ground or low pit, and can be climbing or inclined( one hundred and fifty )Conveying; conveying length can be designed according to customers.  

6、 Low cost, energy saving and durable, maintenance rate polar, can ensure the normal operation of the main, increase output, reduce consumption, improve efficiency.  

7、 Conveying granular materials is not easy to be broken.  

 Production site of chain scraper conveyor  

 

 FU Technical parameters of scraper conveyor  

Specification and model

FU200

FU270

FU350

FU410

FU500

Groove width( mm

two hundred

two hundred and seventy

three hundred and fifty

four hundred and ten

five hundred

Conveying capacity( m ³ /h

10----30

20---60

35----100

50----130

80----200

Chain speed( m/min

10-----30

10----30

12-----30

12----25

12----30

Chain pitch( mm

one hundred and twenty-five

one hundred and eighty-five

two hundred

two hundred

three hundred

Conveying distance( m

8---50

8----50

8----50

8----50

8----50

Conveying gradient (°)

fifteen

 

Motor power( KW

2.2---7.5

3---15

4---22

4---30

5.5---45

Drive mounted

Left and right, back style

Transmission mode

                         Chain drive

Applicable particle size( mm

five

seven

nine

eleven

twenty-five



Henan high tech Development Zone

Tel: 0371-56783311 online QQ: 1105086557 email: [email protected] Website map

Copyright No. 13022-2009 Engine technology network